We manufacture corrugated boxes, inserts, and displays to best meet your individual packaging demands. Being one of the top ten manufactures in California we are capable of making boxes with a wide range of sizes, using the materials that best fit your products needs. We also die-cut boxes and do label laminating or printing.

Regular Slotted Carton (RSC)
Our most common box style. The Regular Slotted Carton is made from a one piece blank, where the outer flaps meet at the center of the box.

Half Slotted Container (HSC)
Same as Regular Slotted Container without one set of flaps.

Partial Overlap Container (POL)
All flaps have the same length. The outer flaps overlap by one inch or more. The box is easily closed, usually with staples driven through the overlap area. This style is used when the length of the box is considerably greater than the width, resulting in a long gap between the inner flaps. The sealed over-lap helps to keep the outer flaps from pulling apart.

Full OverLap Carton (FOL)
All flaps have the same length (the width of the box). When closed, the outer flaps come within one inch of complete overlap. The style is especially resistant to rough handling. Stacked on its bottom panel, the overlapping flaps provide added cushioning. Stacked on its side, the extra thickness provides added stacking strength.

Center Special Slotted Container (CSSC)
Inner and outer flaps are cut to different lengths. Both pairs of flaps meet at the center of the box. This style is especially strong because both the top and bottom have double the thickness of corrugated board. The inner flaps, with no gap, provide a level base for the product. A variation of this box is the Slide Special Slotted Container - SSS. All pairs of flaps meet, but not at the center of the box.

Full Telescope Design Style Container (FTD)
Two design style trays, one inverted and fitting over the other.

Design Style Container with Cover (DSC)
Same as the Full Telescoping Design container but the top tray is a lid with little depth and the bottom tray has considerably more depth.

Octagonal Double Cover Container (ODCC)
Cylindrical design offers excellent compressive and sidewall strength. Good for loose fill or bulk applications.

One Piece Folder (OPF)
One piece of board is cut so that it provides a flat bottom, with flaps forming the sides and ends, and extensions of the side flaps meeting to form the top.

Five Panel Folder (FPF) or Harnes Style Five Panel Folder
A single cut and scored piece features a fifth panel used as the closing flap, completely covering a side panel. The closed box has several layers of combined board on each end, providing stacking strength and protection for long articles of small diameter which might be damaged, or damage the box, if pushed through the ends.

Corrugated Pads
Plain sheets of corrugated cut to your specifications. Pads are often used to separate layers of product within a box.

Built Up Pads
Laminated layers of corrugated pads for special thick cushioning or filler purposes. Usually for heavy duty needs.

Corrugated Dividers
Intersecting sheets of corrugated board create a Divider. Like Pads, Dividers are used to separate items within a box. Dividers are especially suited for packaging fragile contents.

Die Cut Boxes
A vast selection of custom corrugated die cut styles are available for mailers, bin boxes, self-erecting boxes, product display boxes, computer packaging and shipping boxes.